Audio

How to Remove Background Noise from a Video (and Isolate Your Voice)

Remove fan hum, traffic and room noise from videos, isolate a voice from music, and balance voice and music so every video sounds professional.

By the VideoLab team · Last updated · 4 min read

Viewers forgive soft footage much more easily than bad sound. A hum, an echo or music fighting your voice makes people scroll away within seconds, even when the content is great. It also hurts your captions and AI edits, because noisy speech is harder to transcribe.

This guide covers the three audio problems creators hit most, noise, competing music and uneven levels, and how to fix each one in VideoLab.

Three different problems

ProblemSounds likeTool
Steady background noiseFan, air conditioning, fridge, traffic, hissClean voice
Voice mixed with music or loud soundsTalking over a song, a busy café, a gameIsolate voice
Uneven volumeOne clip loud, the next quiet; music louder than the voiceConsistent volume and sound check

Using the right tool for each problem gives a far more natural result than pushing one tool too hard.

Clean voice: remove background noise

Clean voice removes steady background noise, like ventilation, traffic hum and hiss, while keeping your voice natural. It is fast and works on any clip.

How to use it:

  1. Select the clip in the editor.
  2. Open the Audio panel and choose Clean voice.
  3. Listen to the result in a quiet moment between sentences: that is where the difference is most obvious.

Best for: home recordings, outdoor talking heads, laptop microphones, anything with a constant hum.

Limits: it is made for steady noise. A dog barking or a door slamming is not steady noise: cut around those moments instead.

Isolate voice: separate speech from music

Isolate voice keeps only the voice of a clip. Music and background sounds are removed. It uses an AI model that separates the sources in the soundtrack, so it works even when the music is as loud as the voice.

How to use it:

  1. Select the clip.
  2. Choose Isolate voice in the Audio panel, or right-click the clip.
  3. A new version of the clip, marked "voice only", replaces the original on the timeline. Ctrl+Z brings back the original.

Best for: a vlog filmed with music playing, an interview in a café, reusing a clip that already has music under it, or replacing the music with your own.

Good to know: isolating a voice is heavier processing. Allow about two to three times the length of the clip, and up to 10 minutes per clip.

Balance the whole video

Clean clips can still sound bad together. Two final steps make the video sound like one piece:

Consistent volume

In the Project panel (nothing selected), the Global edits section has consistent volume: every clip is brought to the same loudness, and the export targets the level streaming platforms expect. No more jumping for the volume button between two clips.

Sound check

The sound check reviews the whole mix: overall loudness, peaks that could distort, the balance between voice and music, and whether linked sound is in sync with its video. Run it before every export.

Music under the voice

A simple rule: music should sit well below your voice. You can lower the music clip's volume or let the AI Editor mix the music under your voice automatically.

Record better sound in the first place

Fixing audio works, but clean recordings always sound better:

  • Mic close to the mouth. A lavalier or a small mic a hand's width away beats a camera mic across the room.
  • Soft room. Rugs, curtains and furniture absorb echo. Avoid empty rooms and bathrooms.
  • Turn off the noise. Fans, air conditioning, fridges, notifications.
  • Record music separately. Talk without music; add it in the edit.
  • Check before a long take. Record ten seconds, listen with headphones, then go.

More tips in how to film for AI editing.

Why clean audio also improves your captions and AI edits

Every AI tool in VideoLab starts by transcribing what you say. Clean audio means:

  • Accurate captions, with fewer words to correct.
  • Precise cuts, because silences are real silences, not noise.
  • Better clip choices in the Clip Factory, because the AI understands every sentence and can hear real reactions.

If your audio is noisy, clean it first, then generate captions or run the AI Editor.

Plans

The editor is free forever. Clean voice, Isolate voice and the other AI audio tools are Lab+ features: you can try them on any account, and exporting a video that uses them requires Lab+. When you export on Free, VideoLab tells you which Lab+ features the edit uses and lets you remove them or upgrade.

Frequently asked questions

Can I remove background music from a video and keep the voice?

Yes. Isolate voice separates the voice from music and other sounds, even when the music is loud.

What is the difference between Clean voice and Isolate voice?

Clean voice removes steady noise (fans, hum, traffic) and is fast. Isolate voice separates the voice from everything else, including music, and takes longer. Use Clean voice for noise, Isolate voice for music.

Will removing noise make my voice sound robotic?

Clean voice is designed to keep the voice natural. If a recording is extremely noisy, some artefacts can remain; recording closer to the microphone is the real fix.

How do I make all my clips the same volume?

Use consistent volume in the Project panel's Global edits: every clip is levelled, and the export targets a standard loudness for streaming platforms.

Does it work on my phone?

The editor runs on iPhone, Android, Windows and Mac with the same account. Tools and processing time can vary by device.